Logo

What exactly is the difference between a surge protector and a fuse? Can a fuse protect the electronic devices from lightning instead of surge protector?

Last Updated: 19.06.2025 03:56

What exactly is the difference between a surge protector and a fuse? Can a fuse protect the electronic devices from lightning instead of surge protector?

[old diagram got deleted by accident]

The bolt then partially travels down the line to your home.

In schematic diagrams this is the symbol for a fuse:

What is the logic behind the porn being legal but not prostitution? Isn't it the same thing in essence?

2024–10–11 [Victor Olarewsju Victor Olarewaju ]

It also is a device that limits the change in current flow.

Barnstars:

What is a good habit and what is bad one?

This one hit behind the barn.

There are three different concepts here that are getting confused.

At one ohm, the resistor has a maximum of 1 watt power.

5 Simple Walking Tricks That Burn Fat and Build Muscle, According to a Trainer - Eat This Not That

2024–10–00 [ Ammar Mahdi ] Ammar Mahdi

but I think this circuit , shows a few more pieces.

A circuit breaker is similar, but is resettable.

Why are we explaining today’s “climate change” as driven by human related “green house” gasses when natural “global warming” pushed sea level up to the “shores” of Topeka with no human contribution or even presence? Is Occam’s Rasor applied?

2024–10–10[John johnson John Johnson ]

This is the picture of an electronic coil of wire wound around a core of magnetic material.

The MOV will conduct when the voltage exceeds 50% of line voltage.

Kuorans, what are some things unique to your country?

So combined with a device called a MOV or Metal-oxide-resistor, then forms the 3rd part of a “surge suppressor “.

But during the surge, the fuse will not blow if it is a longer duration and lower value )10 to 50%).

2024–10–14 [Omar Gharbi Omar Gharbi ]

My wife admitted to cheating on me with a married man. Should I tell this man and his wife that I know?

[image of Common-mode choke]

The third is lightning and “how it gets conducted into a home.”

This is an electronic circuit designed to clamp voltages so that the Voltage Potential that appears at the outlet is never going to exceed the nominal value.

Is it true that people who are possessed by demons cannot see them until the demon is cast out? What is the reason for this?

(Dc diagram shown, AC is similar).

He then describes the function of a fuse.

For this case there are devices called Metal oxide varistors (MOV).

Why does it itch on my vulva, uterus, and sides of my vagina, but it doesn't itch inside the vagina?

Now when you have a certain ac resistance, then a current flows in a loop.

“ A surge suppressor is the one which is connected at the input supply so that when there is a sudden change voltage it bypasses thereby protecting the (circuit) and electronic components”

This device then solves the entire problem.

The Best Deals Today: Indiana Jones and the Great Circle, Nintendo Switch OLED, and More - IGN

It seems Mohan does not understand the difference between a comment and an Answer.

Mohan forgets that a fuse is a one-time device, and needs to be replaced if it is tripped.

Here is a simplified AC power diagram.

Why do so many guys love anime girls?

OK, this is Mohan Rajaratnam’s definition of a Surge suppressor.

2024–10–11 [Bobby Sanchez Bobby Sanchez ].

So, it’s possible that these devices from Trip Lite have addition suppression devices, these ones seem to be sturdy.

Your daily horoscope: June 17, 2025 - The Globe and Mail

At least they know the answer if they wanted it.

“ … to protect building, lightning arrestor, is provided above building and directly connected to earth.”

but this device (an Inductor) … impedes the rapid changes in the current.

Can a Trump supporter explain what was wrong with what Bishop Budde said to Donald Trump?

P = e* I, so since I is 16 amps, then the voltage dropped is 1/16 volt or 0.0650 volts.

what exactly is a ‘surge’ protector?

so, what happens?

This is where this question deviates from being a 'generic' question, and becomes more specific.

There is no harm in having the surge suppressor along with the fuse in the circuit. The fuse will not open up until the current melts the link. This will take time, and in the interim, that jolt will get transmitted into the power supplies.

so, the loop of wire then, when put together with another loop reduces the ‘noise’ on a power line.

So, the voltage could go up to 500 volts, and the fuse will not open up.

And this is the problem alone. Is the power supply in the equipmemt designed with a lightning strike in mind? Some yes, others, no.

This is 'the assistant's answer'

At the secondary, it is 1000 times less.)turns ratio). If it gets hit with a 100,000 volt bolt of lightning then the voltage arrestors conduct and clamp the voltage down to line voltage, ( but a small amount leaks down the line). This is the problem.

“ A fuse is a device which protects the (circuit) against overload and short circuit.”

An AC voltage/ current source, and an ac inductive load.

What does a fuse do?

Fuses, on their own, then operate much slower than the MOV variable resistance, during the lightning strike.

(There is no concept of polarity, in the loop because the current changes direction 100 to 120 times a second (power frequency).

2024–10–16 [ OO OLAOYE OYEBODE ]

A fuse is a non-resetable over current circuit protector.

When the current is 200% of the rated value , it will “go open” (the link metal melts) and protect the device.

He then asserts :

a photo is worth a thousand words.

This is a high voltage low current spike that comes down the line because of the power poles being struck, and the voltage suppressors activating on the primary side of the transformer.

Lightning arrestor is a spark-gap device, and can be installed anywhere. What is important, is that the wire is thick enough to withstand the lightning bolt and conduct the energy away from the building.

This is where the MOV conducts again, and dissipated the energy.

eight

Because the load is inductive, the current lags the voltage.(by a bit).

These are simplified answers to the original question, and does not change anything I wrote above.

nine

Would individual surge supressors have save this equipment? most likely, since the surge supressor would take the jolt instead of the electronic components.

But it can get overloaded, and no longer works.

One

If the nominal power is 4,000 watts then the current at 230volts is 16 amps.

What is lightning?

Upvotes:

Can the fuse protect the electronic devices from lightning instead of a surge protector.

Is the question then , "why buy a surge supressor, if the fuse alone protects the electronic circuits from a lightning bolt?".

The other is “what does a “fuse” do?”

Edit 2024–10.

But… the neutral is now “floating” because of the 1 ohm resistance.

These devices are installed between the “hot” and “neutral” and protective ground.

There are two important concepts here.

I post the exact comment here.

Once the voltage goes over 0.0650 volts, then this fact can be used to amplify the difference, and turn the circuit breaker off , furthur down the line. Essentially that is what a RCD/GFCI does, it compares the incoming current, to the outgoing current, and if the difference between the two currents is over 5mA, then it trips the circuit breaker.

One is “what exactly is in a ‘surge protector’ ? ”

It’s been three xxx five werks, and there has been no response to my follow on query on his Commment to my answer.

This is a photo where a lightning bolt took out a home's complete mains distribution box, and a lot of electronic gear as well.

the problem then depends on "how fast does the fuse operate?".

First Sentence:

2024–09–27 [ Mohan Rajaratnam Mohan Rajaratnam ] . Thinks you can get free electricity from nothing : Mohan Rajaratnam's answer to Is it possible to generate free electricity at home using a magnet or other low-cost methods? If so, how does it work?

He then describes Rainy Season and Lightning.